KINKOU158 mixtura aeris (Cu-Ni-Sn C72900)
Alte rigore et altitudinis vi* Consequi compositum.Ictum dynamicum potest sustinere onera.Possunt gravissimis postulatis onus et pressionis structurae stabilis occurrere.Relaxatio remissio accentus scelerisque significanter melior est quam beryllium stannum aeris.
2. Praeclara exercitatio anti-stidii gerendi, cum magni operis naturalis auto-lubricationis sine paris captionis frictione, materia necessaria est ad portum portandum magnae aircraft, et etiam praelata attritio componentis olei bene cohaerentis virga. et caliditas alte et alte materie onus alterna.
*Conversio effectus est facilis conversionis aes mixturae perfacile est ad processum in componentibus complexum.
* Apta ad omnia genera environment acidicae vel aquae salsae, caliditas corrosioni resistentiae.
* Bonum glutino faciendum.
*Status electricae signanter melior est quam beryllium mixturae aeris.Magnetismum non generat et materia est apta connexionibus summus temperatus et RF connexiones.
*Non-toxicus et innocens, environment-amica materia.
1. Chemical Compositio C72900
| Model | Ni | Sn | Alia Elementa Alloy | immunditias | Cu |
| C72900 | 14.5-15.5 | 7.5-8.8 | 0.2-0.6 | ≤0.15 | reliquiae |
2. Physica de C72900
| Modulus elasticus | Poisson's Ratio | Electrical Conductivity | Scelerisque conductivity | Scelerisque Expansion Coefficient | Density | Permeability |
| 21×10^6psi | 0.33 | ＜7% IACS | 22 Btu/ft/hr/°F | 9.1×10^-6 in/in/°F | 0.325 lb/in^3 | 1.001 |
| 144kN/mm^2 | ＜4 MS/m | 38 W/M/℃ | 16.4×10^-6 m/m/℃ | 9.00 g/cm^3 |
3. Mechanica Minimum proprietatibus C72900
| publicae | Diameter | cede virtus 0.2% | Ultima distrahentes Fortitudo |
| Prolongatio | duritia | Mediocris CVN Impact Toughness | ||||
| digitis | mm | ksi | N/mm^2 | ksi | N/mm^2 | % (4D) | HRC | ft-lbs | J | ||
| Rod | TS 95 | 0.75-3.25 | 19-82 | 95 | 655 | 106 | 730 | 18 | 93 HRB | 30* | 40* |
| 3.26-6.00 | 83-152.4 | 95 | 655 | 105 | 725 | 18 | 93 HRB | 30* | 40* | ||
| TS 120U | 0.75-1.59 | 19-40.9 | 110 | 755 | 120 | 825 | 15 | 24 | 15 | 20 | |
| 1.6-3.25 | 41-82 | 110 | 755 | 120 | 825 | 15 | 24 | 12 | 16 | ||
| 3.26-6.00 | 83-152.4 | 110 | 755 | 120 | 825 | 15 | 22 | 11** | 14** | ||
| TS 130 | 0.75-6.00 | 19-152.4 | 130 | 895 | 140 | 965 | 10 | 24 | - | - | |
| TS 160U | 0.25 | 6.35 | 150 | 1035 | 160 | 1100 | 5 | 32 | |||
| 0.26-0.4 | 6.35-10 | 150 | 1035 | 160 | 1100 | 7 | 32 | ||||
| 0.41-0.75 | 10.1-19 | 150 | 1035 | 165 | 1140 | 7 | 36 | ||||
| 0.76-1.6 | 19.1-41 | 150 | 1035 | 165 | 1140 | 5 | 34 | ||||
| 1.61-3.25 | 41.1-82 | 150 | 1035 | 160 | 1100 | 3 | 34 | ||||
| 3.26-6.00 | 83-152.4 | 148 | 1020 | 160 | 1100 | 3 | 32 | ||||
| Filum | TS 160U | 0.25 | 6.35 | 150 | 1035 | 160 | 1100 | 5 | 32 | ||
| 0.26-0.4 | 6.35-10 | 150 | 1035 | 160 | 1100 | 7 | 32 | ||||
| Tubus | TS 105 | 1.50-3.05（ Diameter externus) | 38-77（ Diameter Externus) | 105 | 725 | 120 | 830 | 15 | 22 | ||
| 1.50-3.05（ Diameter externus) | 38-77（ Diameter Externus) | 105 | 725 | 120 | 830 | 16 | 22 | 14*** | 19*** | ||
| TS 150 | 1.30-3.00 | 33-76; | 150 | 1035 | 158 | 1090 | 5 | 36 | - | - | |
| *: Quodlibet valorem non minus quam XXIV libras ft-(32J) | |||||||||||
| **: Omnis pretii non minus quam X pondo ft (13.5J) | |||||||||||
| ***: Omnis pretii non minus quam 16J; Tantum exemplaria CVN (10mm weidth x 10mm crassitudine) | |||||||||||
4. Tolerantiae Standard of Rod and Wire of C72900
| publicae | Type | Diameter | Tolerantia Diametri | Rectitudo tolerantia | |||
| digitis | mm | digitis | mm | digitis | mm | ||
| TS 160U | Rod | 0.25-0.39 | 6.35-9.9 | +/-0.002 | +/-0.05 | longitudo = 10ft, deviationis 0,25 digitorum | longitudo = 3048mm , deviatio 6.35mm |
| 0.4-0.74 | 10-18.9 | +0.005/-0 | +0.13/-0 | ||||
| TS 95, TS 120U, TS 130, TS 160U | Rod | 0.75-1.6 | 19-40.9 | +0.02/+0.08 | +0.5/+2.0 | longitudo = 10ft, deviationis 0,5 digitorum | longitudo = 3048mm , deviatio 12mm |
| 1.61-2.75 | 41-70 | +0.02/+0.10 | +0.5/+2.5 | ||||
| 2.76-3.25 | 70.1-82 | +0.02/+0.145 | +0.5/+3.7 | ||||
| 3.26-6.00 | 83-152.4 | +0.02/+0.187 | +0.5/+4.75 | ||||
| TS 160U | Filum | 0.4 | 10 | +/-0.002 | +/-0.05 |
|
|
5. Standard Tolerantia Tubae C72900
| publicae | Diameter | Murum crassitudine | Tolerantia Diametri | Rectitudo tolerantia | |||
| digitis | mm | mm | digitis | mm | digitis | mm | |
| TS 160U | 1.50-1.99 | 38-50 | 10-20% of Externi Diameter* | ±0.010 | ±0.25 | longitudo=10ft, deviationis 0,5 digitorum ** | longitudo = 3048mm , deviatio 12mm |
| 2.00-3.050 | 51-76 | 10-20% of Externi Diameter* | ±0.012 | ±0.30 | |||
| TS 150 | 1.30-1.99 | 33-52 | 8-20% of Externi Diametri* | ±0.008 | ±0.20 | longitudo=10ft, deviationis 0,5 digitorum ** | longitudo = 3048mm , deviatio 12mm |
| 2.00-3.00 | 53-79 | 6-10% of Externi Diameter* | ±0.010 | ±0.25 | |||
| *Nam tantum referat.Quaeso reprehendo cum ferro plant ad rationem requiritur | |||||||
| ** Minor recta tolerantia praesto " | |||||||
6. Applicationem C72900
Maxime usus est pro coitu virga Sucker, armorum MWD, scapus manica et gasket in petrolei industria;
Expositis calces scapus manica et aircraft gerens;Pressura vascula sigillis;Slide dux, caliditas obsistens et corrosio obsistens connexiones.etc.